Details determine success or failure. This may be a wise saying often used by many military strategists. A person who pays attention to details in life must be a person who is careful and pursues perfection. He may be more comprehensive in doing things. For enterprises, especially clothing customization enterprises, only by paying attention to details, can they succeed. Effective innovation can only be achieved by starting with the details. Let’s take a look at how important the custom-made details of professional attire are?
How important are the body measurement details in customizing professional attire? Before measuring the body, you must first carefully observe the main parts of the human body. When measuring, you should pay attention to the following points:
1. The person being measured is required to stand upright, with a natural posture, and do not take deep breaths.
2. When measuring the circumference and width, be careful not to pull the tape too loose or too tight, and keep it level.
3. When measuring the chest circumference, keep the arms of the person being measured vertically; when measuring the waist circumference, loosen the belt.
4. When making summer clothing in winter, or winter clothing in summer, the size should be appropriately reduced or enlarged according to customer requirements when measuring.
5. Pay attention to the body shape characteristics when measuring, and mark any special parts for reference when cutting.
6. Different body types have different requirements. For fat people, the size should not be too fat or too thin, while for thin people, the size should be appropriately generous.
7. Measurements should be carried out in order to avoid leakage.
Specific method of measuring body
1. Overall height: represents the “number” of clothing, measured vertically from the top of the head to the base of the feet.
2. Clothing length: Measure from the base of the neck on the left side of the front body, through the high point of the chest, to the required length, usually to the thumb of the hand.
3. Bust: represents the “shape” of top clothing. Measure around the outside of the shirt, along the armpits, and through the full part of the chest, and add additional sizes as needed.
4. Shoulder width: Measure from the outer vertex of the left shoulder bone to the outer vertex of the right shoulder bone (the soft ruler is in the center of the back and close to the base of the back neck to form a slight arc). When the style needs to be exaggerated, the shoulders can be appropriately relaxed. The lantern sleeves can be narrowed appropriately.
5. Sleeve length: Measure from the outer tip of the left shoulder bone to the thumb of the hand, increase or decrease the length as needed.
6. Cuff: Measure around the wrist, and then add a ruler as needed. The size can also be calculated using the bust ratio method according to different styles.
7. Collar size: Measure around the circumference of the throat bone and add additional size as needed.
8. Waist section: The general body shape can be calculated based on the overall height. When encountering a special body shape, you need to measure the front and rear waist joints (put a tape measure around the thin part of the waist to make it horizontal), and measure the front and rear waist joints respectively.
9. Pants length: Measure from the upper end of the hip bone on the left side of the waist, 4 cm upward to the heel minus 3 cm.
10. Waist: represents the “style” of pants clothing. Measure around the outer edge of the trousers at the narrow waist and add extra size as needed.
11. Hip circumference: Measure the circumference along the fullness of the buttocks for a week, and relax as needed.
12. Upper crotch: Measure from the upper end of the hip bone on the right side of the waist, 4 cm upward, to the root of the thigh.
Measuring shoulder width and chest width
Shoulder width: It is the length between the end points of the left and right shoulders, measured through the back of the neck point.
Back Width: Measure the length of your back between the left and right rear axillary points.
Chest Width: Measure the length between the left and right front axillary points of the chest.
Breast distance: the length between the left and right breast peaks.
Measurement of girth
Bust: Measure around the breast point with a tape measure horizontally. Be careful not to be too tight or too loose. There are shoulder bones on the back and the size may fall easily.
Under-breast circumference: Use a tape measure to measure horizontally around the lower end of the breast.
Waist circumference: Use a measuring tape to measure horizontally around the thin part of your mid-waist, and adjust the degree of relaxation according to the variety.
Hip circumference: Measure around the fullness of the buttocks for a week, and increase the degree of relaxation.
The above is the relevant introduction to how important are the customization details of professional attire customization? Tailor-made clothing is the biggest advantage of custom-made clothing compared to ready-made clothing. During the production process, the handling of details can not only achieve one version for each person, but also the tactility is unmatched by ready-made clothing.
Tag: Professional attire customization How important are these custom-made measurement details
