A stamp is a special printed matter that is sold and affixed to deeds, vouchers, etc. as a tax. A voucher used to seal official documents in the old days, such as a tax stamp. Later, with the passage of history, printing gradually evolved and was used in all walks of life. Among them, the clothing industry is one of the important industries that use printing. So, what are the techniques of clothing printing? The following is a Get up and take a look.
Clothing printing process 1. Water slurry (bang slurry)
The so-called water slurry is a kind of water-based slurry. It does not feel strong when printed on clothes, and its coverage is not strong. It is only suitable for printing on light-colored fabrics. The price is relatively low, and it is a lower-end printing type. But it also has an advantage, because it will not affect the original texture of the fabric, so it is more suitable for large-area printing patterns.
Clothing printing process 2. Glue (water-based ink)
The emergence and widespread use of glue after water slurry. Because of its very good coverage, any light color can be printed on dark clothes, and it has a certain gloss and three-dimensional effect, making the ready-made clothes look more high-end. , so it became popular quickly and is used on almost every printed T-shirt. However, because it has a certain hardness, it is not suitable for large-area solid patterns. Large-area patterns are still printed with water slurry, and then dotted with some glue. This can not only solve the problem of hard glue in large areas, but also highlight the layers of the pattern. Another method is to hollow out a large area of solid patterns to create a bad effect, but it will always feel a bit stiff when worn, so it is better to combine water and glue to solve the problem of large-area printing.
Clothing printing process 3. Thick board slurry (thermosetting ink or water-based thick board glue)
Thick board paste is based on glue. It is like multiple layers of glue printed repeatedly. It can achieve a very neat three-dimensional effect. Generally speaking, the process requirements are relatively high, so generally small printing factories are printing Bad, some don’t even have this technology, let alone printing it well, but it is a printing method that is currently popular all over the world! It is generally suitable for use on more sports and leisure models. The patterns generally use numbers, letters, Geometric patterns, lines, etc., the lines should not be too thin. Some people also use it to print floral patterns in a unique way, which can be seen on leather or thicker fabrics for autumn and winter clothing.
Clothing printing process 4. Ink (thermoset ink or screen printing ink)
At first glance, ink does not look much different from glue. However, when glue is printed on smooth fabrics such as windbreaker materials, the color fastness is generally very poor and can be scraped off with a strong fingernail. However, ink can overcome this shortcoming. Therefore, when making windbreakers, they are usually printed with ink.
Clothing printing technology 5. Nylon pulp
Nylon pulp, it is said that nylon pulp has better tension. It may be named because it has a little elasticity like nylon. Thin and refreshing feel
Clothing printing technology 6. Bead planting clothing design
Bead planting is a relatively demanding process. Nowadays, only a few factories can do it well, and almost no ordinary factories have this technology.
Planting beads is also called toothbrush flower. The finished product looks like toothbrush whiskers standing up one after another. It is said that a flower needs to be printed twenty or thirty times before it is printed well. The height of the finished product can reach about 0.3CM. The top of it can It is in the shape of a round bead, and can be made of other colors on top, as if it is holding beads on top, so it is also called planting beads.
Clothing printing technology 7. Hand-painted clothes
The hand-painted effect is somewhat similar to printing, but more flexible and free. It can be regarded as equivalent to painting on clothes. The phrase “Asian clothing” can almost explain hand-painted. This year, I saw some high-end women’s clothing fabrics in the fabric market. I think it is It is a combination of hand-painted and hand-cranked crafts, and beading is added later. It sells for more than 40 yuan per yard, but there are very few operators. I have cooperated with a hand-painted artist before, and the price is not very expensive. Maybe because For this reason, he has now changed his career. Hand-painting is done with acrylic paint that is insoluble in water after drying. Friends who are interested can go to the art store to buy a box and paint one by themselves~~ In the past, I usually painted on On T-shirts and jeans. Now it has been widely used on various fabrics and even chiffon. Combined with this year’s ethnic customs, it has a new charm!
The above is an introduction to the clothing printing process. I hope it can bring some help to everyone. In life, there is nothing unimaginable and nothing impossible. As people’s aesthetic needs increase, more and more printing industries exist, adding color to the beauty of people’s lives.
Tag: Clothing Printing
